loader image

Follow us on

+971 (0)4 267 4540

FID-30R/ 31R Fibre Identifier

Data Sheet

Get Quote

The FID-30R includes an optical power meter and succeeds the FID-25R while the FID-31R, the updated standard model, replaces the FID-26R. The fibre identifiers, used for identifying the light power presence in optical fibres, include three detecting functions: TONE, TRAFFIC, and ONU. Both models include a trigger operated clamp to macro-bend the fibre in order to leak light which is then detected by two photo sensors. The fibre identifiers can detect the presence of several kinds of light signal and indicate signal directions. The trigger lock function ensures the fibre is clamped with constant pressure, while the 2.4″ colour LCD touch panel, equipped with a backlight function, allows the user to view the estimated optical power in the fibre and select the desired wavelength of 1310nm, 1490nm, or 1550nm. Identification of modulated tones at 270Hz, 1kHz and 2kHz is provided, along with continuous wave and ONU signals. Users are also able to select from three detection sensitivity modes; normal, fast and fine . The fibre identifiers can be used for UV-coated fibre, 0.9mm diameter tight buffered fibre, fibre cord up to 3mm in diameter, and fibre ribbon with up to 12 fibres.
  • Robust body design for the field
  • Universal fiber clamp design applicable for many types of fibers
  • 2.4″ full color LCD touch screen with the backlight
  • Trigger lock function for continuous fiber clamping
  • Adjustable setting
  • Connector head for power meter is interchangeable
    Firmware update via internet
Features
  • Robust body design for the field
  • Universal fiber clamp design applicable for many types of fibers
  • 2.4″ full color LCD touch screen with the backlight
  • Trigger lock function for continuous fiber clamping
  • Adjustable setting
  • Connector head for power meter is interchangeable
  • Firmware update via internet
Application
  • PON or point-to-point network verification and troubleshooting
  • Fast, accurate single-mode fiber fault location using OTDR and VFL
  • Single-mode optical network characterization using OTDR
  • Single-mode loss testing using integrated source and power meter
Models

FlexScan is currently available in five models:

  • FS200-50B:  1550 nm OTDR for cost-effective point-to-point network troubleshooting, including detection of high-loss macro-bends.
  • FS200-60:  1650 nm  filtered version for cost-effective live PON troubleshooting. Use the optional integrated Power Meter to verify downstream power levels.
  • FS200-100:  1310/1550 version for more complete point-to-point network installation verification, as well as troubleshooting.  By testing at both wavelengths, FlexScan can differentiate poor splices from macro-bends, as well as qualify the network for operation in both 1310 and 1550 nm windows.
  • FS200-300:  1310/1550 PON OTDR version for installation verification and troubleshooting of out-of-service PON or point-to-point networks.  Offers higher dynamic range to test through splitters, as well as longer point-to-point networks.
  • FS200-304:  1310/1550/1650 PON OTDR version for in-service PON troubleshooting, as well as out-of-service PON or point-to-point network installation verification or troubleshooting.

All models include an integrated VFL and are available with optional integrated source, power meter and Bluetooth/Wi-Fi wireless communications.

Kit Configuration

FlexScan test sets are available in six standard kit configurations:

  • BASIC Kit: Includes selected FlexScan, wrist strap, soft carry case, Quick Reference Guide plus TRM™ 2.0 Basic Test Results Manager software. Soft case includes room for optional accessories such as connector cleaning supplies, fiber ring (launch cable) or FOCIS Flex connector inspection solution.
  • PLUS Kit: Adds a One-click cleaner, 150 m fiber ring (launch cable) plus TRM 2.0 Advanced to a FlexScan Basic Kit.
  • PRO Kit: Adds an auto-focusing FOCIS Flex Fiber Optic Connector Inspection System to a FlexScan Plus Kit.
  • BI Complete Kit: Adds OFI-BI Bend-insensitive Optical Fiber Identifier to FlexScan PRO Kit.
  • BIPM Complete Kit: Adds OFI-BIPM Bend-insensitive Optical Fiber Identifier with Power Meter to FlexScan PRO Kit.
  • MPO Kit: Includes selected FlexScan and accessories, MFS-12-SM Single-mode Multi-Fiber Switch, USB cable and 30 m fiber to connect FlexScan to Switch, plus 30 m MPO Launch Cable to connect Switch to MPO-terminated multi-fiber network.

For details and ordering information on model options and kit configurations, see the FlexScan datasheet.

Related Products

Need Help? Chat with us